1
of
6
Loading...
Savage Gear E-Rider Kayak 330
Savage Gear's E-Rider is a lightweight inflatable boat designed for fishing that can be moved around easily while also offering excellent stability and versatility. Savage Gear's inflatable E-Rider kayak is the perfect solution for exploring smaller untouched bodies of water that cannot be accessed with larger boats. The buoyant pontoons of ensure stability and safety while fishing or moving from one place to another, and also allow for fishing from a standing position. Gliding effortlessly through the water, E-Rider was designed for use with an electric (max. 19 kg) or combustion outboard motor (max. 2 hp). You can of course choose paddle power as well. The detachable fin on the bottom significantly improves directional stability and makes the kayak easier to paddle with.
The lightweight (20 kg) E-Rider packs down to take up very little space, and can thus be carried in the trunk of most cars. The inflatable kayak is made from reinforced 0.9 mm thick PVC material, and it has three separate inflatable compartments including side pontoons and an 8 cm thick bottom pontoon. Reinforcement strips have been added to the back of the pontoons on the underside, which allow you to drag the boat over ground without damaging the pontoons.
Due to its high carrying capacity (200 kg), you can, in addition to the angler and a motor, load up the E-Rider inflatable kayak with plenty of fishing equipment and electronics to create a precision fishing vessel for your precise requirements. The aluminum tension bar at the front can be used for the screen of a fishfinder, a transducer mount, rod holders, etc. The front of the kayak has a compartment that allows you to store a battery or other equipment safe from the rain.
A sturdy line runs around the sides of the inflatable kayak which can be used for carrying or attaching an anchor, drag anchor, and other similar items. There are also attachments for the included paddle on the side of the kayak. In addition to an outboard motor, the wide transom can also be used for a transom mount for a sonar transducer. When using an electric outboard motor, it is advisable to power the motor with a lightweight lithium battery for reasons of balance and size.
Savage Gear's inflatable E-Rider kayak comes with a foot pump, paddle, and patch kit with patches and adhesive.
Specifications:
• Material: Reinforced 0.9 mm PVC
• Floor: Inflatable 8-cm PVC pontoon
• Packs down small
• Very stable
• Plug hole on the floor
• Quick inflation and deflation
• 3 x Protech valves
• Lightweight 260-cm paddle
• Detachable fin on the bottom
• Transom for an electric (max. 19 kg) or combustion outboard motor (max. 2 hp)
• Aluminum bench at the rear
• Aluminum stiffener at the bow that can be used to attach a sonar or rod holders, for example
• Reinforcement strips on the bottom of the pontoons for pulling along the ground
• Lines around the sides for an anchor or for carrying
• Sturdy handle at the front for pulling
• Recommended pressure: side pontoons 3.6 PSI, floor 10 PSI
• Patch kit
• Foot pump
• Length: 330 cm
• Width: 110 cm
• Height: 30 cm
• Weight: 20 kg
• Carrying capacity: 200 kg
Regular price
636,65 €
Unit price /
Unavailable
Prices exclude VAT
Delivery Unavailable
View shipping methods
Secure payment methods
View payment methods
Shipping methods
Estimated delivery: Unavailable
-
UPS - United Parcel Service
Fast and reliable global deliveries with UPS.
-
Posti
Worldwide shipping with national postal services.
🎣 Club Member Shipping Benefits!
Additional details
Additional details
Description
Description
Savage Gear's E-Rider is a lightweight inflatable boat designed for fishing that can be moved around easily while also offering excellent stability and versatility. Savage Gear's inflatable E-Rider kayak is the perfect solution for exploring smaller untouched bodies of water that cannot be accessed with larger boats. The buoyant pontoons of ensure stability and safety while fishing or moving from one place to another, and also allow for fishing from a standing position. Gliding effortlessly through the water, E-Rider was designed for use with an electric (max. 19 kg) or combustion outboard motor (max. 2 hp). You can of course choose paddle power as well. The detachable fin on the bottom significantly improves directional stability and makes the kayak easier to paddle with.
The lightweight (20 kg) E-Rider packs down to take up very little space, and can thus be carried in the trunk of most cars. The inflatable kayak is made from reinforced 0.9 mm thick PVC material, and it has three separate inflatable compartments including side pontoons and an 8 cm thick bottom pontoon. Reinforcement strips have been added to the back of the pontoons on the underside, which allow you to drag the boat over ground without damaging the pontoons.
Due to its high carrying capacity (200 kg), you can, in addition to the angler and a motor, load up the E-Rider inflatable kayak with plenty of fishing equipment and electronics to create a precision fishing vessel for your precise requirements. The aluminum tension bar at the front can be used for the screen of a fishfinder, a transducer mount, rod holders, etc. The front of the kayak has a compartment that allows you to store a battery or other equipment safe from the rain.
A sturdy line runs around the sides of the inflatable kayak which can be used for carrying or attaching an anchor, drag anchor, and other similar items. There are also attachments for the included paddle on the side of the kayak. In addition to an outboard motor, the wide transom can also be used for a transom mount for a sonar transducer. When using an electric outboard motor, it is advisable to power the motor with a lightweight lithium battery for reasons of balance and size.
Savage Gear's inflatable E-Rider kayak comes with a foot pump, paddle, and patch kit with patches and adhesive.
Specifications:
• Material: Reinforced 0.9 mm PVC
• Floor: Inflatable 8-cm PVC pontoon
• Packs down small
• Very stable
• Plug hole on the floor
• Quick inflation and deflation
• 3 x Protech valves
• Lightweight 260-cm paddle
• Detachable fin on the bottom
• Transom for an electric (max. 19 kg) or combustion outboard motor (max. 2 hp)
• Aluminum bench at the rear
• Aluminum stiffener at the bow that can be used to attach a sonar or rod holders, for example
• Reinforcement strips on the bottom of the pontoons for pulling along the ground
• Lines around the sides for an anchor or for carrying
• Sturdy handle at the front for pulling
• Recommended pressure: side pontoons 3.6 PSI, floor 10 PSI
• Patch kit
• Foot pump
• Length: 330 cm
• Width: 110 cm
• Height: 30 cm
• Weight: 20 kg
• Carrying capacity: 200 kg
The lightweight (20 kg) E-Rider packs down to take up very little space, and can thus be carried in the trunk of most cars. The inflatable kayak is made from reinforced 0.9 mm thick PVC material, and it has three separate inflatable compartments including side pontoons and an 8 cm thick bottom pontoon. Reinforcement strips have been added to the back of the pontoons on the underside, which allow you to drag the boat over ground without damaging the pontoons.
Due to its high carrying capacity (200 kg), you can, in addition to the angler and a motor, load up the E-Rider inflatable kayak with plenty of fishing equipment and electronics to create a precision fishing vessel for your precise requirements. The aluminum tension bar at the front can be used for the screen of a fishfinder, a transducer mount, rod holders, etc. The front of the kayak has a compartment that allows you to store a battery or other equipment safe from the rain.
A sturdy line runs around the sides of the inflatable kayak which can be used for carrying or attaching an anchor, drag anchor, and other similar items. There are also attachments for the included paddle on the side of the kayak. In addition to an outboard motor, the wide transom can also be used for a transom mount for a sonar transducer. When using an electric outboard motor, it is advisable to power the motor with a lightweight lithium battery for reasons of balance and size.
Savage Gear's inflatable E-Rider kayak comes with a foot pump, paddle, and patch kit with patches and adhesive.
Specifications:
• Material: Reinforced 0.9 mm PVC
• Floor: Inflatable 8-cm PVC pontoon
• Packs down small
• Very stable
• Plug hole on the floor
• Quick inflation and deflation
• 3 x Protech valves
• Lightweight 260-cm paddle
• Detachable fin on the bottom
• Transom for an electric (max. 19 kg) or combustion outboard motor (max. 2 hp)
• Aluminum bench at the rear
• Aluminum stiffener at the bow that can be used to attach a sonar or rod holders, for example
• Reinforcement strips on the bottom of the pontoons for pulling along the ground
• Lines around the sides for an anchor or for carrying
• Sturdy handle at the front for pulling
• Recommended pressure: side pontoons 3.6 PSI, floor 10 PSI
• Patch kit
• Foot pump
• Length: 330 cm
• Width: 110 cm
• Height: 30 cm
• Weight: 20 kg
• Carrying capacity: 200 kg
