Lowrance Autopilot for Hydraulic Steering

This new autopilot from Lowrance is designed to be directly connected to Lowrance HDS Gen2 and HDS Gen2/3 Touch devices via NMEA2000. The autopilot is controlled directly from the compatible HDS device's display. All you need for installing the autopilot is included. Focus on the fishing and let the autopilot keep you on course!

This autopilot includes all you could ask for: steering along routes and to waypoints, keeping a constant heading and different turning patterns. Thanks to simple connectors, this autopilot is very easy to install. The package includes the autopilot computer, Point-1 heading/GPS sensor and, depending on the model, either a drive unit or a hydraulic pump (Baystar/Seastar compatible) + Auto/Stand-by button.

New SmartSteer interface allows you to fully control the autopilot with your HDS Gen2 or HDS Gen2/3 Touch display. SmartSteer allows you to switch between trolling-motor and outboard motor control on the fly. In addition to regular navigation features, this autopilot also has several pre-programmed trolling patterns. You can easily transform your day's trail into a route and return the same way you came.

• Control your outboard motor directly with a HDS Gen2 or Gen2/3 Touch device and automatically steer to a heading, waypoint, route or cursor
• The new SmartSteer interface allows the autopilot to directly control MotorGuide Xi5 Pinpoint trolling motors
• Transform trails into routes with just one touch
• Several turn/trolling patterns for more effective trolling
• Recommended for boats under 9 m long with a single motor
• VRF (Virtual Rudder Feedback) makes installation simple and eliminates the need for a rudder position sensor
• Easy setup: clear instructions and menus
• Easy to install: plug-and-socket connections

Package contents:
• NAC-1 autopilot computer
• PUMP-1 hydraulic pump (0.8 l)
• Point-1 heading and GPS sensor
• Hydraulic fitting kit (T-connectors, 3x75 cm hydraulic hoses and hydraulic oil)
• NMEA2000 kit (4-way N2K joiner, 2 ft, 6 ft and 15 ft N2K cables, N2K power cable, terminators)
• Auto/Stand-by button

Note! The Lowrance autopilot requires a Lowrance HDS Gen2 or Gen2/3 Touch device to work. The device must be updated to software version 3.5 or newer. The updates are available on Lowrance's website.

Fishing experts at your service. Feel free to ask — we’re happy to help! 🎣

customerservice@happyangler.com